Free & fast delivery on all mainland UK orders over £50
0 Reviews

150W Flexi Solar Panel - white rear exit

The 150W PV Logic flexi solar panel with a rear cable exit is fixed completely flush to the roof and is fitted to many caravans and campervans with a high-power demand. The 150W panel will deliver up to 900wh per day which is enough to keep users self-sufficient without the need for a mains connection. Supplied with a shading diode box, 4m cable, fuse, fuseholder and detailed user manual. NOTE – A charge controller will be needed to protect a battery from reverse feed and overcharging.... View more

Add Charge Controller
Which controller do I need?
£470.00£235.00
Product code: n/a
Product information

Overview

Product support

Find fitting instructions, advice on expanding a solar system and answers to frequently asked questions on our dedicated support page for PV Logic Flexi Solar Panels.

PV Logic Flexi solar panels are the ultimate choice for flat or slightly curved surfaces.

Benefit from the semi-flexible panel's resilience

The ETFE top layer gives the PV Logic flexi extra resilience in really tough conditions.

Completely waterproof

Each panel is assembled to ensure complete encapsulation. This ensures the six layer heavy duty laminate protects the solar cell circuit from extreme conditions. The junction box is also injected with special silicon, guaranteeing no water ingress.

Superior design

There are no square edges on a PV Logic flexi solar panel!  

Underside cable exit

The cable of the 150W flexi panel exits the panel from the underside allowing for a completely flush fit to your roof. 

Cells protected from hot spots

A remote shading diode box is ensures consistent performance even in partially shady conditions.

Easy fix

The semi-flexible range can be bonded to flat or slight curved surfaces (3cm curve per metre) such as painted aluminium, metal, GRP and fibreglass using Henkel MS939 elastic adhesive. For more information about what sets the PV Logic Flexi range apart from other panels click here.

Installation method

Please only use the glue pattern below (this is covered in more detail in the user manual), which ensures air flow under the panel is achieved preventing heat build-up and potential warping under extreme heat.

Add a controller

The PV Logic range of charge controllers includes the 10A and 20A dual battery PWM charge controllers and, for the ultimate in rapid solar charging, there is the MPPT range.

The MPPT Pro charge controller increases solar yield by up to 20% over a standard charge controller by artificially modifying the voltage from s solar panel system to actively match any battery's requirements. This means that whatever the weather conditions your panels will deliver maximum power with minimum electrical loss.

The MPPT charge controller comes with its very own free-to-download Bluetooth app (Apple and Android) to display how the solar system is performing. The app software links your smartphone to the MPPT Pro and shows performance figures for your leisure battery.

Complete your kit with fixing accessories

Buy PV Logic stands, brackets and fixings here 

Features

High efficiency crystalline cell for all weather charging
High efficiency crystalline cell for “all weather” charging
Water resistant, robust construction for outdoor use.
Water resistant, robust construction for outdoor use.
In built diode protects against battery discharge
In built diode protects against battery discharge
Salt spray tested
Salt spray tested
Tough and robust
Tough and robust
UV light tested
UV light tested

Technical Specification

 
 
Power Size Weight
(kg)
Watts per
day (W)
Amp hours
per day (A)
Charge
Controller
Pmax (WP) Vmp (VDC) Imp (A) Voc(V) Isc(A)
150W Rear Exit 1475 x 665 x 4mm 6.7 900 51.12 20A 150 17.6 8.52 21.9 9.2 Download Tech Spec
 

Key

  • Vmp - Nominal voltage
  • Imp - Nominal current
  • Isc - Short circuit current
  • Watts and Amp hours/day based on six hours of average daily peak sunlight hours.

Contents
1 x 150W semi-flexible solar panel - white rear exit
1 x 4m cable (to connect from shading diode box to charge controller and battery)
1 x 1m cable fixed to solar panel
1 x shading diode box
1 x fuse & holder
1 user manual

Warranty

Products bought from our outlet store do not come with an extended warranty.  Your statutory rights as a consumer are not affected.

Delivery & returns

Delivery

UK: Standard delivery for orders under £50 is £5. Delivery is free for all orders over £50 (3 to 5 day service) 

Next day delivery (UK only): Charged at £7.50 if ordering before 2pm *

Delivery to Europe, the US and rest of the world: Please contact orders@solartechnology.co.uk for costs and delivery options

* If ordered after 2pm, your order will ship the following day. If ordered on a Friday your order will arrive on a Monday, or if ordered after 2pm the order will ship on the Monday, as long as it is not a bank holiday.

Returns

Your Right To Cancel
You have the right to cancel your order within seven working days of delivery and return the goods supplied to us for a refund of the price of the goods. You must notify us in writing during this period of your intention to cancel by

Letter to -

Solar Technology International Ltd.
Unit 6
Station Drive
Bredon
Nr Tewkesbury
Gloucestershire
GL20 7HH

Tel – 01684 774000

Or email orders@solartechnology.co.uk

Any goods supplied must be returned to the address above at your own expense within the seven days of your notice to cancel. Providing the goods are returned in their original, unused condition and the packaging is undamaged, you will receive a full refund of the price of the goods within 30 days of us receiving the goods back.

Unless the goods are defective, damaged or not as specified on your order acknowledgement, you are responsible for the cost of returning the goods. We recommend that you use Recorded Delivery, as proof of shipping is not proof of receipt. If, however, the goods are faulty then the postage costs will be refunded. Please provide us with a copy of the postage receipt.